3D Model Retarder
45.00 SEK
10 i lager redo att skickas omgående
Retarder – thins Color for airbrush use and extends open time for smooth blends. Guide values: the finer the nozzle, the more – 10% at 0.4–0.5 mm, 20% at 0.2–0.3 mm, up to 30% at high pressure and long spray times. Prevents drying at the nozzle; Primer-Leveler mixes also get Retarder for spraying.
Part of the 3D Model Color system · 30 ml bottle
Application
Straight onto the print: no primer needed. Shake well before use, apply thin, recoat after 10–15 minutes. Brush straight from the bottle; for airbrush, thin with Retarder – 10 to 30 percent, the finer the nozzle, the more.
Technique
Water-based color system, highly pigmented and detail-friendly. Bonds to PLA, PETG, ABS and ASA. 30 ml dropper bottle with dosing tip.
